Identify Your Guition JC8012P4A1 Display

The installer lists the firmware choices. Use these checks if you are unsure which one matches your display.

Identify your revision

1. Check the chip revision. ESPHome startup logs may report it. If it is ESP32-P4 v3.x, choose V3, regardless of the case number.
2. For other chip revisions, check the four-digit rear-case number. Choose V1 for 2627 or lower, or V2 for 2628 or higher. The case may not say V1 or V2.

If you still cannot confirm the hardware, ask for help with a photo of the rear label and any chip information you have.

Install

Return to the installer and select the matching hardware version. WiFi and Immich setup are the same for every supported display.